Looking for Photoshop Layer to print a board
Moderator: TFF Mods
- Dark Duke
- Veteran
- Posts: 201
- Joined: Wed Jan 26, 2005 7:57 am
- Location: Valencia
Looking for Photoshop Layer to print a board
I've been playing with the kit that Colin shared in FUMBBL to create pitches (link here). I wanted to use it to print a board, but it looks like it doesn't have enough resolution for printing. Does anyone have printable Photoshop layers with pitches textures (i.e. grass, sand, etc.) that will be willing to share?
Reason: ''
Life is short, block fast.
-
- Super Star
- Posts: 766
- Joined: Thu Sep 12, 2002 9:06 am
- Location: Australia
- Contact:
Re: Looking for Photoshop Layer to print a board
PM me. It might not be exactly what you want, but it is in Photoshop.
Reason: ''
=-) Babs (crotchety old, washed up has-been)
ex-BBRC member
ex-NAF AUS/NZ Tournament organiser
Make sure you have read the Feudball Novel.
ex-BBRC member
ex-NAF AUS/NZ Tournament organiser
Make sure you have read the Feudball Novel.
- frogboy
- Legend
- Posts: 2083
- Joined: Sun Nov 15, 2009 2:20 pm
- Location: South Wales
Re: Looking for Photoshop Layer to print a board
Boom
You do not have the required permissions to view the files attached to this post.
Reason: ''
I'm a British Freebooter, will play for any team including Undead (I have my own Apothecary). Good rates.
- Dark Duke
- Veteran
- Posts: 201
- Joined: Wed Jan 26, 2005 7:57 am
- Location: Valencia
Re: Looking for Photoshop Layer to print a board
PM sent, thank you!Babs wrote:PM me. It might not be exactly what you want, but it is in Photoshop.
Reason: ''
Life is short, block fast.
-
- Rookie
- Posts: 9
- Joined: Mon Dec 12, 2016 11:45 am
Re: Looking for Photoshop Layer to print a board
Is it possible to share it with me also? I'm very interested in creating my own BB pitch!Babs wrote:PM me. It might not be exactly what you want, but it is in Photoshop.
Thanks
Reason: ''
-
- Rookie
- Posts: 11
- Joined: Wed Sep 15, 2010 6:47 am
Re: Looking for Photoshop Layer to print a board
Here's what I've made a few years ago : http://www.gulix.fr/blog/spip.php?article205 (french article, follow the Mediafire link)
Here are some previews : http://www.gulix.fr/bbfields/
Here are some previews : http://www.gulix.fr/bbfields/
Reason: ''
-
- Rookie
- Posts: 9
- Joined: Mon Dec 12, 2016 11:45 am
- lobosolo
- Rookie
- Posts: 15
- Joined: Sat Sep 15, 2012 1:11 pm
Re: Looking for Photoshop Layer to print a board
Dark Duke wrote:I've been playing with the kit that Colin shared in FUMBBL to create pitches (link here). I wanted to use it to print a board, but it looks like it doesn't have enough resolution for printing. Does anyone have printable Photoshop layers with pitches textures (i.e. grass, sand, etc.) that will be willing to share?
I have the PSD of my pitches that I make here
just message me if you want it. most everything here is in layer that can be removed. I have these squares set to 29mm wide, so it should be simple enought to move it up a few % to get it to 32mm or down to 25mm.
Reason: ''
- Dark Duke
- Veteran
- Posts: 201
- Joined: Wed Jan 26, 2005 7:57 am
- Location: Valencia
Re: Looking for Photoshop Layer to print a board
I was able in the end to create one from scratch but thanks anyway for the offer. Nice pitch!lobosolo wrote: just message me if you want it. most everything here is in layer that can be removed. I have these squares set to 29mm wide, so it should be simple enought to move it up a few % to get it to 32mm or down to 25mm.
Reason: ''
Life is short, block fast.
- DixonCider
- Super Star
- Posts: 929
- Joined: Mon May 14, 2012 5:16 pm
- Location: Calgary Canada
- Contact:
Re: Looking for Photoshop Layer to print a board
you may also want to check this guy out http://maelstromdesign.ca/
Reason: ''