Street Brawl boards are in stock

Lahatiel · Post by **Lahatiel** » Fri Jul 21, 2006 10:58 am

With a little variance in the measurements, I'm guessing they're a lot like this:

http://www.rare-earth-magnets.com/detail.aspx?ID=70

traveller · Post by **traveller** » Fri Jul 21, 2006 11:13 am

yep... they look like this and my measures guessing was quite good

Traveller

Post by **GalakStarscraper** » Fri Jul 21, 2006 2:31 pm

Okay but those are too thick as the inside of a base is only 2 mm.

Okay that helps.

Galak

Musta Surma · Post by **Musta Surma** » Fri Jul 21, 2006 7:55 pm

Then why not have the base made of one magnet, the measurements are perfect.

http://www.rare-earth-magnets.com/detail.aspx?ID=59

Darkson · Post by **Darkson** » Fri Jul 21, 2006 8:29 pm

Are they easy to cut (gotta account for the slot)?

Musta Surma · Post by **Musta Surma** » Fri Jul 21, 2006 9:09 pm

Thats a good question, otherwise you can cut the part iff the min and glue it to the surface of the magnet instead??

Post by **GalakStarscraper** » Sat Jul 22, 2006 1:47 am

Darkson wrote:Are they easy to cut (gotta account for the slot)?

Most likely not.

Impact! is looking into getting magnets that would fit into a side of a 25mm slotted base (ie they are thin enough that they fit inside a base (ie less than 2mm thickness).

I have a sample of one being sent to me this weekend from a company I talked to.

Galak

Storch · Post by **Storch** » Sat Jul 22, 2006 1:56 am

I wouldn't try to cut the magnets.
First, they are sintered powder and will do very bad things to your saw.
Second, the act of sawing them will greatly reduce theuir magnetic performance.

darthnoir · Post by **darthnoir** » Sun Jul 23, 2006 1:02 pm

Do the Street Brawl boards fold down into the same size or smaller than the size of the current Blood Bowl boards?

I'm trying to figure out what size of box to bring to GenCon.

Post by **GalakStarscraper** » Sun Jul 23, 2006 1:07 pm

darthnoir wrote:Do the Street Brawl boards fold down into the same size or smaller than the size of the current Blood Bowl boards?

I'm trying to figure out what size of box to bring to GenCon.

They quad fold to the same size as a Blood Bowl board.

Galak

Chairface · Post by **Chairface** » Mon Jul 24, 2006 6:55 pm

Ordered my board! (Along witha few other goodies)

Post by **GalakStarscraper** » Mon Jul 24, 2006 7:30 pm

Chairface wrote:Ordered my board! (Along witha few other goodies)

Went to the post office today.

Galak

lawquoter · Post by **lawquoter** » Tue Jul 25, 2006 1:08 am

I pre-ordered mine weeks ago, tom, can I just pay and pick up at gencon in a few weeks?

Post by **GalakStarscraper** » Tue Jul 25, 2006 1:26 am

lawquoter wrote:I pre-ordered mine weeks ago, tom, can I just pay and pick up at gencon in a few weeks?

Yes they will be available two times at GenCon.

Once at the Street Bowl tournament on Thursday.

Once on Saturday between rounds at the GenCon Bowl.

Both times they will be $23 a piece.

Galak

Igor Tahavanale · Post by **Igor Tahavanale** » Tue Jul 25, 2006 6:32 pm

Woo-hoo! Boards arrived today

(with boozey bird and bum weights)

All very nice. Another quality job from Impact!